Ship Construction Essay Example | Topics and Well Written Essays - 750 words

Ship Construction - Essay ExamplePounding stress can be reduced by reinforcing the hull plating at the bow end of the ship to prevent the abode from crimp. Likewise, panting pressure can be countered through reinforcement of the framing at the ships end to avoid irregular movement of the hull plating. (Okumoto et. al, 2009)A ship is basically a back up beam that is subjected to waves. This leads to external stresses i.e. sagging and hogging. Hogging occurs when a substantial portion of the center of the vessel is supported by the buoyant force of a wave with the rest of the vessel unsupported. This produces a tensile stress in the deck and also other compressive forces at the bottom of the hull. Likewise, sagging happens the center of the vessel is relatively unsupported with the either ends supported by a wave. The figure below shows the boom structure cut a way of the stress distribution in the hull through the hierarchy of structure and the direction of the stresses. (Derrett & Barrass, 2006)The bending stresses atomic number 18 zero at one location i.e. the neutral axis. Also, the reaction forces are equal at both ends with no rotation. The bending stresses are positive in one flange and negative in the other in the middle of the span. Lastly, the shear stresses are highest in the middle of the span. (Derrett & Barrass, 2006)The main parts of a double bottom include plating, bilge plating, floors, intercostal girders, bilges, brackets, longitudinals, pillars and angle clips. The double bottom mainly extends from the ice chest top to the flat keel and is watertight so as to keep the ship afloat in case of accidents. The intercostal girders combine with beams to form the decks longitudinal framing together with the longitudinals. Brackets are used to connect any two members of the double bottom while bilge plating is a longitudinal plating that is used to connect the bottom plating with the side shell plating. Pillars constitute upended members that are used to connect the double